Product ID:LASER PRINTER HIGH YIELD CARTRIDGE, 1380520
MSDS Date:08/12/1993
FSC:7510
NIIN:01-374-0902
MSDS Number: BWRHM

IBM CORP

OLD ORCHARD ROAD
ARMONK, NY 10504
US

Emergency Phone: 800-426-4333; 615-366-2000

Info Phone: 800-426-4333; 615-366-2000

Cage: 7N876

IBM CORPORATION

ARMONK, NY 10504-1709 US

Telephone: 800-426-4333/FAX 214-280-3903

Cage: 30874

(ORAL, RAT) >10 G/KG

CAS: 1333-86-4

RTECS: FF5800000

Fraction By Weight: 10%

OSHA PEL 3.5 MG/M3

ACGIH TLV: 3.5 MG/M3

STYRENE BUTYLACRYLATE COPOLYMER

CAS: 60806-47-5

Fraction By Weight: >1%

OSHA PEL N/K

ACGIH TLV: N/K

RESPONSIBILITY OF EMPLOYER TO CONDUCT AIR MONITORING

RTECS: 9999999ZZ

CONTAM LEVELS FOUND IN WORKPLACE, MUST NOT EXCEED

RTECS: 9999999ZZ

INSTITUTE FOR OCCUPATIONAL SAFETY & HEALTH AND MINE

RTECS: 9999999ZZ

FIGHT & OTHER IMMED DANGEROUS TO LIFE/HLTH CNDTNS

RTECS: 9999999ZZ

PRESS-DEMAND/OTHER POS-PRESS MODE. ANY NIOSH/MSHA

RTECS: 9999999ZZ

DEMAND/OTHER POS-PRESS MODE IN COMBINATION

RTECS: 9999999ZZ

RESPONSIBILITY OF EMPLOYER TO CONDUCT AIR MONITORING

RTECS: 9999999ZZ

LD50 LC50 Mixture:SEE INGREDIENT 1
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE/CHRONIC: NO INFORMATION
AVAILABLE ON SIGNIFICANT ADVERSE EFFECTS. TOXICOLOGY INFORMATION:
CARBON BLACK: LOCAL EFFECTS: IRRITANT - INHALATION, SKIN. ACUTE
TOXICITY LEVEL: SLIGHTLY TOXIC BY INGEST ION. POISONING MAY AFFECT
THE RESPIRATORY SYSTEM, THE HEART, SKIN & ORAL MUCOSA.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:IT IS UNLIKELY THAT EMERGENCY TREATMENT WILL BE REQUIRED. IF
ADVERSE EFFECTS OCCUR: INHAL: REMOVE FROM EXPOSURE, TREAT
SYMPTOMATICALLY & SUPPORTIVELY & GET MED ATTN. SKIN: WASH W/LARGE
AMOUNTS OF WATE R & MILD SOAP & GET MED ATTN. EYES: WASH W/WATER
OR NORMAL SALINE FOR AT LEAST 15 MINUTES & GET MED ATTN. INGEST:
TREAT SYMPTOMATICALLY & SUPPORTIVELY & GET MED ATTN.

Extinguishing Media:DRY CHEMICAL, CARBON DIOXIDE, WATER SPRAY OR
REGULAR FOAM. FOR LARGER FIRES, USE WATER SPRAY, FOG OR REGULAR
FOAM.
Fire Fighting Procedures:USE NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP.
MOVE CNTNR FROM FIRE AREA IF YOU CAN DO W/OUT RISK. DO NOT SCATTER
SPILLED MATL W/HIGH-PRESS WATER (SUPDAT)
Unusual Fire/Explosion Hazard:SLIGHT FIRE HAZARD WHEN EXPOSED TO HEAT
OR FLAME. DUST-AIR MIXTURES MAY IGNITE OR EXPLODE.

Spill Release Procedures:SWEEP UP AND PLACE IN SUITABLE CLEAN, DRY
CONTAINERS FOR RECLAMATION OR LATER DISPOSAL. DO NOT FLUSH SPILLED
MATERIAL INTO SEWER. KEEP UNNECESSARY PEOPLE AWAY. RESIDUE SHOULD
BE CLEANED UP USING HIGH- EFFICIENCY PARTICULATE FILTER VACUUM.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:OBSERVE ALL FEDERAL, STATE AND LOCAL
REGULATIONS WHEN STORING THIS SUBSTANCE. STORE AWAY FROM
INCOMPATIBLE SUBSTANCES.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Respiratory Protection:BASED ON COMPONENTS PRESENT &/OR INFO IN
PHYSICAL DATA, HLTH EFTS/TOX SECTIONS, NO RESP WOULD BE REQD UNDER
NORM CNDTNS OF USE. HOWEVER, AIR CONTAM MONITORING SHOULD BE
CARRIED OUT TO ASSURE EMPLOYEES ARE NOT EXPOS TO HARMFUL CONCS
(SUPDAT)
Ventilation:DUE TO PACKAGING & QTY OF MATL INVOLVED, NO ADDNL VENT
SHOULD BE REQD UNDER CNDTNS OF NORM USE. IT IS (ING 3)
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD SAFETY GLASSES .
Other Protective Equipment:PROTECTIVE CLOTHING NOT REQUIRED UNDER
NORMAL CONDITIONS.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
FIRE FIGHT PROC: STREAMS. DIKE FIRE-CTL WATER FOR LATER DISP. USE
AGENTS SUITABLE FOR TYPE OF SURROUNDING FIRE. AVOID BRTHG HAZ VAPS;
KEEP UPWIND. RESP PROT: OF ANY COMPONENT. IF RESP PROT IS REQD, IT
MUST BE BASED ON CONTAM LEVELS FOUND IN WORKPLACE, MUST NOT EXCEED
WORKING LIMS OF RESP & BE NIOSH/MSHA APPRVD.

HCC:N1
Melt/Freeze Pt:M.P/F.P Text:140F,60C
Appearance and Odor:BLACK POWDER WITH A SLIGHT ODOR.

Stability Indicator/Materials to Avoid:YES
MAY REACT DANGEROUSLY WITH OXIDIZERS AND OTHER CHEMICALS. SEE ICDS FOR
COMPLETE INFORMATION.
Stability Condition to Avoid:NO DATA AVAILABLE.
Hazardous Decomposition Products:THERMAL DECOMPOSITION MAY RELEASE
TOXIC & HAZARDOUS CHEMICALS, INCLUDING OXIDES OF CARBON &
UNIDENTIFIED ORGANICS.

Waste Disposal Methods:OBSERVE ALL FEDERAL, STATE AND LOCAL REGULATIONS
WHEN DISPOSING OF THIS SUBSTANCE.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.